Build your own motor mounts for your GM Gen III or IV V8 engine! Simply bolt these CNC cut brackets to your engine and build your own engine mounts off of them. Saves yourself the time of cutting and drilling the thick 1/4" thick steel plates yourself. The tabs for the bushings are also 1/4' thick and punched to accept a common 9/16" bolt. Also avalable are a pair of sleeved polyurethane bushings and 9/16" hardware.
Tabs may be mounted Hole Up for maximum link or driveshaft clearance, or hole down for maximum exhaust header clearance.
Made for the 4 bolt iron block engines.
Welding is required.
Please allow up to a 3 week lead time as our products are made in small batches and we may not have product on hand at the time the order is placed.